Application of fiber model considering the shear effect in the analysis of nonlinear RC shear wall

2018 2nd International Workshop on Renewable Energy and Development

能源学;经济学

Qiang, Zhang^1 ; Zhiqiang, Chen^1 ; Zhenzhen, Gu^1 ; Yanlin, Wang^1

Civil Engineering College, Shanghai Normal University, China^1

关键词: Calculation programs;    Complex loading;    Element stiffness matrix;    Fiber distribution;    Hysteretic rule;    Monotonic load;    Nonlinear properties;    Section fiber model;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/153/4/042008/pdf
DOI  :  10.1088/1755-1315/153/4/042008

来源: IOP

【 摘 要 】

Because of the good performance of the fiber model in the simulation of axial and bending coupling, the new fiber model considering the axial, bending and shear effects is established to analysis the nonlinear properties of RC shear wall. The way of the shear fiber distribution in the cross section consistent with the axial fiber and each shear fiber current state of stiffness get from the independent shear hysteretic rules, then establish tangent element stiffness matrix containing the axial, bending and shear deformation under complex loading paths. Two different cross-section fiber models is compared. Compiling corresponding calculation program to simulate a shear wall's nonlinear performance under monotonic load and compare with the laboratory RC shear wall test results to verify the validity of the model.