Benchmark model correction of monitoring system based on Dynamic Load Test of Bridge

3rd International Conference on Energy Equipment Science and Engineering

Shi, Jing-Xian^1 ; Fan, Jiang^1

Oxbridge College, Kunming University of Science and Technology, KunMing

650106, China^1

关键词: Calculation models;    Design and construction;    Impact coefficients;    Reliability assessments;    Specification requirement;    Structural health monitoring (SHM);    Structural sections;    Theoretical modeling;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/128/1/012015/pdf
DOI  :  10.1088/1755-1315/128/1/012015

来源: IOP

【 摘 要 】

Structural health monitoring (SHM) is a field of research in the area, and it's designed to achieve bridge safety and reliability assessment, which needs to be carried out on the basis of the accurate simulation of the finite element model. Bridge finite element model is simplified of the structural section form, support conditions, material properties and boundary condition, which is based on the design and construction drawings, and it gets the calculation models and the results.But according to the design and specification requirements established finite element model due to its cannot fully reflect the true state of the bridge, so need to modify the finite element model to obtain the more accurate finite element model. Based on Da-guan river crossing of Ma - Zhao highway in Yunnan province as the background to do the dynamic load test test, we find that the impact coefficient of the theoretical model of the bridge is very different from the coefficient of the actual test, and the change is different; according to the actual situation, the calculation model is adjusted to get the correct frequency of the bridge, the revised impact coefficient found that the modified finite element model is closer to the real state, and provides the basis for the correction of the finite model.