The stability of clay using Portland cement and calsium carbide residue with California bearing ratio (cbr) value

Friendly City 4 'From Research to Implementation For Better Sustainability'

地球科学;经济学

Puji Hastuty, Ika^1 ; Roesyanto, R.^1 ; Novia Sari, Intan^1 ; Simanjuntak, Oberlyn^2

Department of Civil Engineering, Universitas Sumatera Utara, Kampus USU, Jl. Perpustakaan, Medan

20155, Indonesia^1

Department of Civil Engineering, Universitas HKBP Nommensen, Jl Perintis Kemerdekaan No. 23, Medan

20218, Indonesia^2

关键词: California bearing ratio;    Carbide residue;    Chemical materials;    Index properties;    Influence of water;    Large volumes;    Short periods;    Soil stabilization;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/126/1/012019/pdf
DOI  :  10.1088/1755-1315/126/1/012019

来源: IOP

【 摘 要 】

Clay is a type of soil which is often used for stabilization. This is caused by its properties which are very hard in dry conditions and plastic in the medium content of water. However, at a higher level of water, clay will be cohesive and very lenient causing a large volume change due to the influence of water and also causing the soil to expand and shrink for a short period of time. These are the reasons why stabilization is needed in order to increase bearing capacity value of the clay. Stabilization is one of the ways to the conditon of soil that has the poor index properties, for example by adding chemical material to the soil. One of the chemical materials than can be added to the soil is calsium carbide residue. The purpose of this research is to know the fixation of index properties as the effect of adding 2% PC and calsium carbide residue to the clay, and to know the bearing capacity value of CBR (California Bearing Ratio) as the effect of adding the stabilization agent and to know the optimum content of adding calsium carbide residue. The result of the research shows that the usage of 2% cement in the soil that has CBR value 5,76%, and adding 2% cement and 9% calsium carbide residue with a period of curing 14 days has the lagerst of CBR value that is 9,95%. The unsoaked CBR value shows the increase of CBR value upto the mixture content of calsium carbide residue 9% and, decreases at the mixture content of calsium carbide residue 10% and 11%.