Speciation of heavy metals Cu, Ni and Zn by modified BCR sequential extraction procedure in sediments from Banten Bay, Banten Province, Indonesia

Global Colloquium on GeoSciences and Engineering 2017

Lestari^1 ; Budiyanto, F.^1 ; Hindarti, D.^1

Research Centre for Oceanography, Indonesian Institute of Sciences Pasir Putih i, Ancol Timur Jakarta, Indonesia^1

关键词: Aquatic environments;    BCR sequential extraction;    Community bureau of references;    Erosion and sedimentation;    Exchangeable fraction;    Geochemical speciation;    Risk assessment code;    Sequential extraction procedure;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/118/1/012059/pdf
DOI  :  10.1088/1755-1315/118/1/012059

来源: IOP

【 摘 要 】

Banten Bay is categorized as a marine area that is busy with marine tourism activities, settlements and also industries. One potential impact of the condition is the occurrence of pollution from both industrial and domestic sources, erosion and sedimentation in the coastal environment. Samples were collected from 25 representative stations in April 2016. Chemical speciation of three heavy metals (Cu, Ni, and Zn) was studied using a modified sequential extraction procedure proposed by the European Standard, Measurements and Testing (SM&T) program, formerly the Community Bureau of Reference (BCR). The aims of this study are to determine geochemical speciation of 4 bounds of metal: acid-soluble, reducible, oxidizable and residual, and to assess their impacts in the sediments of Banten Bay, Indonesia. The result shows that the percentage of Copper (45.90-83.75%), Nickel (18.28-65.66%), and Zinc (30.45-79.51%) were mostly accumulated in residual fraction of the total concentrations. The Risk Assessment Code (RAC) reveals that about 0-7.07% of Copper and 1.11-24.35 % of Zinc at sites exist in exchangeable fraction and therefore, they are in low risk category. While 7.34-34.90 of Ni at sites exists in exchangeable fraction and therefore, it is in medium risk category to aquatic environment.