Enhancing Three-dimensional Movement Control System for Assemblies of Machine-Building Facilities

All-Russian research-to-practice conference "Ecology and safety in the technosphere"

生态环境科学

Kuzyakov, O.N.^1 ; Andreeva, M.A.^1

Industrial University of Tyumen, Russia^1

关键词: Accuracy of measurements;    Analog signals;    Electric signal;    Light emitters;    Luminance levels;    Machine building;    Output values;    Three dimensional movement;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/115/1/012051/pdf
DOI  :  10.1088/1755-1315/115/1/012051

学科分类：环境科学（综合）

来源: IOP

【 摘 要 】

Aspects of enhancing three-dimensional movement control system are given in the paper. Such system is to be used while controlling assemblies of machine-building facilities, which is a relevant issue. The base of the system known is three-dimensional movement control device with optical principle of action. The device consists of multi point light emitter and light receiver matrix. The processing of signals is enhanced to increase accuracy of measurements by switching from discrete to analog signals. Light receiver matrix is divided into four areas, and the output value of each light emitter in each matrix area is proportional to its luminance level. Thus, determing output electric signal value of each light emitter in corresponding area leads to determing position of multipoint light emitter and position of object tracked. This is done by using Case-based reasoning method, the precedent in which is described as integral signal value of each matrix area, coordinates of light receivers, which luminance level is high, and decision to be made in this situation.