Key Technologies and Applications of Gas Drainage in Underground Coal Mine

3rd International Conference on Advances in Energy Resources and Environment Engineering

能源学;生态环境科学

Zhou, Bo^1,2 ; Xue, Sheng^1 ; Cheng, Jiansheng^1 ; Li, Wenquan^2 ; Xiao, Jiaping^2

School of Energy and Safety, University of Science and Technology, Huainan, China^1

Department of Energy Engineering, Huainan Vocational and Technical College, Huainan, China^2

关键词: Attenuation characteristics;    Data transmission rates;    Electromagnetic channels;    Electromagnetic communications;    Electromagnetic signals;    Electromagnetic transmission;    Equivalent transmission line;    Horizontal directional drilling;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/113/1/012151/pdf
DOI  :  10.1088/1755-1315/113/1/012151

学科分类：环境科学（综合）

来源: IOP

【 摘 要 】

It is the basis for the long-drilling directional drilling, precise control of the drilling trajectory and ensuring the effective extension of the drilling trajectory in the target layer. The technology can be used to complete the multi-branch hole construction and increase the effective extraction distance of the coal seam. The gas drainage and the bottom grouting reinforcement in the advanced area are realized, and the geological structure of the coal seam can be proved accurately. It is the main technical scheme for the efficient drainage of gas at home and abroad, and it is applied to the field of geological structure exploration and water exploration and other areas. At present, the data transmission method is relatively mature in the technology and application, including the mud pulse and the electromagnetic wave. Compared with the mud pulse transmission mode, the electromagnetic wave transmission mode has obvious potential in the data transmission rate and drilling fluid, and it is suitable for the coal mine. In this paper, the key technologies of the electromagnetic wave transmission mode are analyzed, including the attenuation characteristics of the electromagnetic transmission channel, the digital modulation scheme, the channel coding method and the weak signal processing technology. A coal mine under the electromagnetic wave drilling prototype is developed, and the ground transmission experiments and down hole transmission test are carried out. The main work includes the following aspects. First, the equivalent transmission line method is used to establish the electromagnetic transmission channel model of coal mine drilling while drilling, and the attenuation of the electromagnetic signal is measured when the electromagnetic channel measured. Second, the coal mine EM-MWD digital modulation method is developed. Third, the optimal linear block code which suitable for EM-MWD communication channel in coal mine is proposed. Fourth, the noise characteristics of well near horizontal directional drilling are analyzed, and the multi-stage filter method is proposed to suppress the natural potential and strong frequency interference signal. And the weak electromagnetic communication signal is extracted from the received signal. Finally, the detailed design of the electromagnetic wave while drilling is given.