Evaluation of axial pile bearing capacity based on pile driving analyzer (PDA) test using Neural Network

4th International Seminar on Sustainable Urban Development

地球科学;经济学

Maizir, H.^1 ; Suryanita, R.^2

Civil Engineering Department, Sekolah Tinggi Teknologi Pekanbaru, Pekanbaru, Indonesia^1

Civil Engineering Department, Faculty of Engineering, Universitas Riau, Pekanbaru, Indonesia^2

关键词: Accurate prediction;    ANN modeling;    Degree of accuracy;    Different soils;    Driven pile;    Neural network model;    Pile driving analyzers;    Testing and evaluation;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/106/1/012037/pdf
DOI  :  10.1088/1755-1315/106/1/012037

来源: IOP

【 摘 要 】

A few decades, many methods have been developed to predict and evaluate the bearing capacity of driven piles. The problem of the predicting and assessing the bearing capacity of the pile is very complicated and not yet established, different soil testing and evaluation produce a widely different solution. However, the most important thing is to determine methods used to predict and evaluate the bearing capacity of the pile to the required degree of accuracy and consistency value. Accurate prediction and evaluation of axial bearing capacity depend on some variables, such as the type of soil, diameter, and length of pile, etc. The aims of the study of Artificial Neural Networks (ANNs) are utilized to obtain more accurate and consistent axial bearing capacity of a driven pile. ANNs can be described as mapping an input to the target output data. The method using the ANN model developed to predict and evaluate the axial bearing capacity of the pile based on the pile driving analyzer (PDA) test data for more than 200 selected data. The results of the predictions obtained by the ANN model and the PDA test were then compared. This research as the neural network models give a right prediction and evaluation of the axial bearing capacity of piles using neural networks.