Molecular Simulation Study on Modification Mechanism of Red Mud Modified Asphalt

1st International Global on Renewable Energy and Development

Tao, F.U.^1 ; Hui-Ming, B.A.O.^1 ; Xing-Xing, Duan^1

College of Civil and Construction Engineering, Guilin University of Technology, Guilin

541004, China^1

关键词: Adsorption capacities;    Electron microscope scanning;    High temperature stability;    Modification mechanism;    Molecular simulations;    Temperature changes;    Temperature sensitivity;    Van der Waals energies;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/100/1/012005/pdf
DOI  :  10.1088/1755-1315/100/1/012005

来源: IOP

【 摘 要 】

This article used red mud, the aluminum industrial wastes, as modified asphalt material, through the study of the routine test of modified asphalt properties, and the micro test of electron microscope scanning, infrared spectrum and differential scanning calorimetry analysis etc.To discuss its performance and modification mechanism . The test results show that after mixing red mud, asphalt's penetration index and 15 °C ductility reduced, softening point enhanced, thus the temperature sensitivity and high temperature stability of asphalt improved; Red mud after mixing the matrix asphalt, can form a uniform, stable and matrix asphalt blending system, and improve the asphalt's thermal stability. Using molecular simulation technology to analyze the asphalt with the temperature change of energy and find in the process of asphalt melting, the largest is the key to influence on bituminous, and van der waals energy is small. It concludes that red mud-modified asphalt material is mainly controlled by bond energy, in order to obtain its favorable property of modification mechanism, red mud of senior activation and molecular bond energy of asphalt is needed to be enhanced.The results of molecular simulation show that the main component of hematite in red mud is the most adsorbed in the asphalt, the asphaltene is the second, the colloid is the worst, but the adsorption capacity of the colloid is the highest.