Analysis of oxidation of self-baking electrodes (Soederberg electrodes) by means of three-dimensional model

Innovations and Prospects of Development of Mining Machinery and Electrical Engineering

矿业工程;电工学

Pashnin, S.V.^1

South Ural State University, Lenina Av. 76, Chelybinsk

454080, Russia^1

关键词: Electrode surfaces;    Lateral electrodes;    Oxidation rates;    Temperature dependence;    Temperature dependencies;    Three-dimensional model;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/87/9/092020/pdf
DOI  :  10.1088/1755-1315/87/9/092020

来源: IOP

【 摘 要 】

The paper presents the methodology and results of the development of the temperature dependence of the oxidation speed of the self-baking electrode (Soederberg Electrodes) in the ore-thermal furnaces. For the study of oxidation, the working ends of the self-baking electrodes, which were taken out from the ore-thermal furnaces after their scabbings, were used. The temperature of the electrode surface by its height was calculated with the help of the mathematical model of heat work of self-baking electrode. The comparison of electrode surface temperatures with the speed of oxidation of the electrode allowed one to obtain the temperature dependency of the oxidation of the lateral electrode surface. Comparison of the experimental data, obtained in the laboratory by various authors, showed their qualitative coincidence with results of calculations of the oxidation rate presented in this article. With the help of the mathematical model of temperatures fields of electrode, the calculations of the sizes of the cracks, appearing after burnout ribs, were performed. Calculations showed that the sizes of the cracks after the ribs burnout, calculated by means of the obtained temperature dependence, coincide with the experimental data with sufficient accuracy.