Assessment of destabilizing factor for automatic control systems in propulsion systems of mechatronic and maritime transport objects

Innovations and Prospects of Development of Mining Machinery and Electrical Engineering

矿业工程;电工学

Zhilenkov, A.A.^1 ; Kapitonov, A.A.^1

ITMO University, 49, Kronverkskiy prospekt, Saint Petersburg

197101, Russia^1

关键词: Diesel generators;    Dynamic characteristics;    Free component;    Maritime transport;    Propulsion system;    Ship power plants;    Stress frequency;    Transient process;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/87/8/082059/pdf
DOI  :  10.1088/1755-1315/87/8/082059

来源: IOP

【 摘 要 】

It is known that many of today's ships and vessels have a shaft generator as a part of their power plants. Modern automatic control systems used in the world's fleet do not enable their shaft generators to operate in parallel with the main diesel generators for long-term sustenance of the total load of the ship network. On the other hand, according to our calculations and experiments, a shaft generator operated in parallel with the main power plant helps save at least 10% of fuel while making the power system of the ship more efficient, reliable, and eco-friendly. The fouling and corrosion of the propeller as well as the weather conditions of navigation affect its modulus of resistance. It changes the free component of the transient process of shaft generator stress frequency changes in transient processes. While the shaft generator and the diesel generator of the ship power plant are paralleled, there emerges an angle between their EMF. This results in equalizing currents generated between them. The altering torque in the drive-shaft line - propeller system causes torsional fluctuations of the ship shaft line. To compensate for the effect of destabilizing factors and torsional fluctuations of the shaft line on the dynamic characteristics of the transient process that alters the RPM of the main engine, sliding mode controls can be used. To synthesize such a control, one has to evaluate the effect of destabilizing factors.