Some problems of control of dynamical conditions of technological vibrating machines

Innovations and Prospects of Development of Mining Machinery and Electrical Engineering

矿业工程;电工学

Kuznetsov, N.K.^1 ; Lapshin, V.L.^1 ; Eliseev, A.V.^2

Irkutsk National Research Technical University, 83, Lermontov St., Irkutsk

664074, Russia^1

Irkutsk State Transport University, 15, Chernyshevsky St., Irkutsk

664074, Russia^2

关键词: Inertial parameters;    Mechanical oscillations;    Oscillating systems;    Static equilibrium;    Structure vibration;    Unilateral constraints;    Vibrating machines;    Vibration technology;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/87/8/082027/pdf
DOI  :  10.1088/1755-1315/87/8/082027

来源: IOP

【 摘 要 】

The possibility of control of dynamical condition of the shakers that are designed for vibration treatment of parts interacting with granular media is discussed. The aim of this article is to develop the methodological basis of technology of creation of mathematical models of shake tables and the development of principles of formation of vibrational fields, estimation of their parameters and control of the structure vibration fields. Approaches to build mathematical models that take into account unilateral constraints, the relationships between elements, with the vibrating surface are developed. Methods intended to construct mathematical model of linear mechanical oscillation systems are used. Small oscillations about the position of static equilibrium are performed. The original method of correction of vibration fields by introduction of the oscillating system additional ties to the structure are proposed. Additional ties are implemented in the form of a mass-inertial device for changing the inertial parameters of the working body of the vibration table by moving the mass-inertial elements. The concept of monitoring the dynamic state of the vibration table based on the original measuring devices is proposed. Estimation for possible changes in dynamic properties is produced. The article is of interest for specialists in the field of creation of vibration technology machines and equipment.