Impact of equalizing currents on losses and torque ripples in electrical machines with fractional slot concentrated windings

Innovations and Prospects of Development of Mining Machinery and Electrical Engineering

矿业工程;电工学

Toporkov, D.M.^1 ; Vialcev, G.B.^1

Department of Electromechanics, Novosibirsk State Technical University NSTU Novosibirsk, Russia^1

关键词: Differential equation systems;    Electrical machine windings;    Flux-linkage functions;    Fractional slot concentrated windings;    Magnetic field calculations;    Manufacturing methods;    Partial derivatives;    Simulation approach;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/87/3/032047/pdf
DOI  :  10.1088/1755-1315/87/3/032047

来源: IOP

【 摘 要 】

The implementation of parallel branches is a commonly used manufacturing method of the realizing of fractional slot concentrated windings in electrical machines. If the rotor eccentricity is enabled in a machine with parallel branches, the equalizing currents can arise. The simulation approach of the equalizing currents in parallel branches of an electrical machine winding based on magnetic field calculation by using Finite Elements Method is discussed in the paper. The high accuracy of the model is provided by the dynamic improvement of the inductances in the differential equation system describing a machine. The pre-computed table flux linkage functions are used for that. The functions are the dependences of the flux linkage of parallel branches on the branches currents and rotor position angle. The functions permit to calculate self-inductances and mutual inductances by partial derivative. The calculated results obtained for the electric machine specimen are presented. The results received show that the adverse combination of design solutions and the rotor eccentricity leads to a high value of the equalizing currents and windings heating. Additional torque ripples also arise. The additional ripples harmonic content is not similar to the cogging torque or ripples caused by the rotor eccentricity.