Formation of Load Parameters of Destroyed Massife in Explosion of Multicharge Composition with Separation of its Parts by Profile Inert Interval

Innovations and Prospects of Development of Mining Machinery and Electrical Engineering

矿业工程;电工学

Paramonov, G.P.^1 ; Mysin, A.V.^1 ; Babkin, R.S.^1

Saint-Petersburg Mining University, 21 Line, 2, Saint Petersburg

199106, Russia^1

关键词: Detonation product;    Gaseous products;    High-temperature flows;    Load parameters;    Mean pressures;    Modeling of gas dynamics;    Physical model;    Reflected wavelets;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/87/5/052021/pdf
DOI  :  10.1088/1755-1315/87/5/052021

来源: IOP

【 摘 要 】

The paper introduces construction of multicharge composition with separation of parts by the profile inert interval. On the basis of the previous researches, the pulse-forming process at explosion of the borehole multicharge taking into account the offered design is considered. The physical model for definition of reflected wavelet taking into account an increment of radius of cross section of a charging cavity and the expiration of detonation products is offered. A technique is developed for numerical modeling of gas-dynamic processes in a borehole with a change in the axial channel of a profile inert interval caused by a high-temperature flow of gaseous products of an explosion. The authors obtained the dependence of the change in mean pressure on the borehole wall on time for each of the parts of the multicharge. To blast a series of charges of the proposed design, taking into account optimization of the stress fields of neighboring charges, the delay interval is determined for a short-delayed explosion.