Study and Behaviour of Prefabricated Composite Cladding

International Conference on Civil Engineering and Infrastructural Issues in Emerging Economies 2017

土木建筑工程;经济学

Sai Avinash, P.^1 ; Thiagarajan, N.^2 ; Santhi, A.S.^1

Department of Structural and Geotechnical Engineering, VIT University, Vellore, Tamil Nadu

632014, India^1

CSIR-National Aerospace Laboratories, Banglore, Karnataka

5600177, India^2

关键词: Competitive prices;    Compressive loads;    Glass fiber reinforced polymer laminates;    Glass fibre reinforced polymers;    High strength;    Load bearing;    Software ABAQUS;    Structural component;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/80/1/012034/pdf
DOI  :  10.1088/1755-1315/80/1/012034

学科分类：土木及结构工程学

来源: IOP

【 摘 要 】

The incessant population rise entailed for an expeditious construction at competitive prices that steered the customary path to the light weight structural components. This lead to construction of structural components using ferrocement. The load bearing structural cladding, sizing 3200x900x100 mm, is chosen for the study, which, is analyzed using the software ABAQUS 6.14 in accordance with the IS:875-87 Part1, IS:875-87 Part2, ACI 549R-97, ACI 318R-08 and NZS:3101-06 Part1 standards. The Ferrocement claddings (FCs) are fabricated to a scaled dimension of 400x115x38 mm. The light weight-high strength phenomena are corroborated by incorporating Glass Fibre Reinforced Polymer Laminates (GFRPL) of thickness 6mm, engineered with the aid of hand layup (wet layup) technique wielding epoxy resin, followed by curing under room temperature. The epoxy resin is employed for fastening ferrocement cladding with the Glass fiber reinforced polymer laminate, with the contemporary methodology. The compressive load carrying capacity of the amalgamated assembly, both in presence and absence of Glass Fibre Reinforced polymer laminates (GFRPL) on either side of Ferrocement cladding, has been experimented.