A comparative study on pyrolysis characteristic Indonesia biomassa and low grade coal

International Conference on Biomass: Technology, Application, and Sustainable Development

生物科学;能源学;经济学

Adhityatama, G.I.^1 ; Hanif, F.^1 ; Cahyono, R.B.^1 ; Hidayat, M.^1 ; Akiyama, T.^2

Department of Chemical Engineering, Gadjah Mada University, JI. Grafika 2, Bulaksumur, Yogyakarta, Indonesia^1

Center for Advanced Research of Energy Conversion Materials, Hokkaido University, North 13 West 8, Kita-ku, Sapporo

060-8628, Japan^2

关键词: Comparative studies;    Decomposition process;    Individual components;    Moisture evaporation;    Pyrolysis characteristics;    Pyrolysis process;    Temperature range;    Thermogravimetric analyzers;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/65/1/012001/pdf
DOI  :  10.1088/1755-1315/65/1/012001

学科分类：生物科学（综合）

来源: IOP

【 摘 要 】

A comparative study on pyrolysis of biomass and low grade coal was conducted using a thermogravimetric analyzer. Each kind of biomass and coal has a characteristic pyrolysis behavior which is explained based on its individual component characteristics. All fuels experienced a small weight loss as temperatures approached 450K because of moisture evaporation. The coal had smallest total weight loss compared to biomass due to its high content of fixed carbon, suggesting that coal would produce high amounts of char and small amounts of volatile matter (e.g., tar and gas). The biomass exhibits similar tendency regarding the decomposition process which is the hemicelluloses break down first at temperatures of 470 to 530K, cellulose follows in the temperature range 510 to 620K, and lignin is the last component to pyrolyzer at temperatures of 550 to 770K. The thermal decomposition of biomass consisted of two predominant peaks corresponding first to the decomposition of cellulose and, second, to the decomposition of lignin. Meanwhile, the coal exhibited only single peak because these fuels were predominantly composed of carbon. Based on the kinetic analysis, coal have the smaller activation energy (55.32kJ/mol) compared to biomass (range from 89.80-172.86 kJ/mol). Pyrolysis process also created more pore material in the solid product. These results were important for the optimization of energy conversion from those solid fuels. Biomass resulted lower solid product and higher tar product, thus would be suitable for liquid and gas energy production.