Adsorption Characteristics of Macroporous Resin for Oil Removal from Desulphurization Wastewater on Board

2016 International Conference on Environmental Engineering and Sustainable Development

生态环境科学;经济学

Li, Tie^1 ; Chen, Chen^1 ; Jin, Qi^1 ; Zhao, Jiao^1 ; Tang, Xiaojia^1 ; Zhu, Yimin^1

Collaborative Innovation Center for Vessel Pollution Monitoring and Control, Dalian Maritime University, Dalian, LIAONING

116026, China^1

关键词: Adsorption characteristic;    Adsorption materials;    Adsorption process;    Desulphurization;    Exhaust gas cleaning system;    International maritime organizations;    Macroporous resin;    Thermodynamics equation;   

Others  :  https://iopscience.iop.org/article/10.1088/1742-6596/51/1/012019/pdf
DOI  :  10.1088/1742-6596/51/1/012019

学科分类：环境科学（综合）

来源: IOP

【 摘 要 】

According to our previous results on the magnesium-based exhaust gas cleaning system (Mg-EGCS), PAHs and total oil content were the main factors affecting the COD in the wastewater. In this work, three kinds of adsorption materials were investigated and macroporous resin was selected for oil removal. The effects of the dosage of macroporous resin, adsorption time and the flow rate were studied, and thermodynamics equation was used to characterize the adsorption process. The results showed that macroporous resin is a good candidate for oil removal from desulphurization wastewater on board, and the COD after treatment can meet the discharge criteria set by the International Maritime Organization (IMO).