Field application of a multi-frequency acoustic instrument to monitor sediment for silt erosion study in Pelton turbine in Himalayan region, India

28th IAHR symposium on Hydraulic Machinery and Systems

Rai, A.K.^1 ; Kumar, A.^1 ; Hies, T.^2 ; Nguyen, H.H.^2

Alternate Hydro Energy Centre, IIT Roorkee, Roorkee, India^1

HydroVision Asia Pte Ltd, 1 Cleantech Loop, 03-05 CleanTech One, Singapore

637141, Singapore^2

关键词: Current status of development;    Hydraulic components;    Laser diffraction instruments;    Laser diffraction method;    Loss of efficiencies;    Sediment concentration;    Sensitivity improvements;    Total dissolved solids;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/49/12/122004/pdf
DOI  :  10.1088/1755-1315/49/12/122004

来源: IOP

【 摘 要 】

High sediment load passing through hydropower components erodes the hydraulic components resulting in loss of efficiency, interruptions in power production and downtime for repair/maintenance, especially in Himalayan regions. The size and concentration of sediment play a major role in silt erosion. The traditional process of collecting samples manually to analyse in laboratory cannot suffice the need of monitoring temporal variation in sediment properties. In this study, a multi-frequency acoustic instrument was applied at desilting chamber to monitor sediment size and concentration entering the turbine. The sediment size and concentration entering the turbine were also measured with manual samples collected twice daily. The samples collected manually were analysed in laboratory with a laser diffraction instrument for size and concentration apart from analysis by drying and filtering methods for concentration. A conductivity probe was used to calculate total dissolved solids, which was further used in results from drying method to calculate suspended solid content of the samples. The acoustic instrument was found to provide sediment concentration values similar to drying and filtering methods. However, no good match was found between mean grain size from the acoustic method with the current status of development and laser diffraction method in the first field application presented here. The future versions of the software and significant sensitivity improvements of the ultrasonic transducers are expected to increase the accuracy in the obtained results. As the instrument is able to capture the concentration and in the future most likely more accurate mean grain size of the suspended sediments, its application for monitoring silt erosion in hydropower plant shall be highly useful.