Assessment of Occupational Health and Safety for a Gas Meter Manufacturing Plant

World Multidisciplinary Earth Sciences Symposium 2016

Korkmaz, Ece^1 ; Iskender, Gulen^1 ; Babuna, Fatos Germirli^1

Istanbul Technical University, Faculty of Civil Engineering, Environmental Engineering Department, Maslak, Istanbul

34469, Turkey^1

关键词: Manufacturing plant;    Occupational health and safety;    Plastic injection;    Risk assessment and managements;    Risk class;    Risk groups;    S implications;    Workplace organization;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/44/3/032015/pdf
DOI  :  10.1088/1755-1315/44/3/032015

来源: IOP

【 摘 要 】

This study investigates the occupational health and safety for a gas meter manufacturing plant. The risk assessment and management study is applied to plastic injection and mounting departments of the factory through quantitative Fine Kinney method and the effect of adopting 5S workplace organization procedure on risk assessment is examined. The risk assessment reveals that there are 17 risks involved; 14 grouped in high risk class (immediate improvement as required action); 2 in significant (measures to be taken as required action) and one in possible risk class (monitoring as required action). Among 14 high risks, 4 can be reduced by 83 % to be grouped under possible class when 5S is applied. One significant risk is observed to be lowered by 78 % and considered as possible risk due to the application of 5S. As a result of either 67 or 50 % reductions in 7 high risks, these risks are converted to be members of significant risk group after 5S implications.