Selection of the optimal completion of horizontal wells with multi-stage hydraulic fracturing of the low-permeable formation, field C

All-Russian Scientific Conference with International Participation on Contemporary Issues of Hydrogeology, Engineering Geology and Hydrogeoecology in Eurasia

Bozoev, A.M.^1 ; Demidova, E.A.^2

Gazpromneft Muravlenko, Muravlenko, Russia^1

Tomsk Polytechnic University, Tomsk, Russia^2

关键词: Analytical approach;    Analytical equations;    Hydraulic fracturing treatments;    Interference effects;    Optimal arrangement;    Optimal completion;    Permeable formations;    Universal equation;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/33/1/012035/pdf
DOI  :  10.1088/1755-1315/33/1/012035

来源: IOP

【 摘 要 】

At the moment, many fields of Western Siberia are in the later stages of development. In this regard, the multilayer fields are actually involved in the development of hard to recover reserves by conducting well interventions. However, most of these assets may not to be economical profitable without application of horizontal drilling and multi-stage hydraulic fracturing treatment. Moreover, location of frac ports in relative to each other, number of stages, volume of proppant per one stage are the main issues due to the fact that the interference effect could lead to the loss of oil production. The optimal arrangement of horizontal wells with multi-stage hydraulic fracture was defined in this paper. Several analytical approaches have been used to predict the started oil flow rate and chose the most appropriate for field C reservoir J1. However, none of the analytical equations could not take into account the interference effect and determine the optimum number of fractures. Therefore, the simulation modelling was used. Finally, the universal equation is derived for this field C, the reservoir J1. This tool could be used to predict the flow rate of the horizontal well with hydraulic fracturing treatment on the qualitative level without simulation model.