Review of critical parameters in biomass combustion emissions control by means of hybrid filter

3rd Iberian Meeting on Aerosol Science and Technology

Sanz, D.^1 ; Rojas, E.^1 ; Rodríguez-Maroto, J.J.^1 ; Ramos, R.^2 ; Borjabad, E.^2 ; Escalada, R.^2 ; García-Alonso, S.^1 ; Gutierrez-Canas, C.^3 ; Aragon, G.^3 ; Mugica, I.^3 ; Ibarra, I.^3 ; Celades, I.^4 ; Sanfelix, V.^4

CIEMAT, Ave Complutense 40, Madrid

28040, Spain^1

CEDER-CIEMAT, Motorway A-15 exit 56, Lubia (Soria)

42290, Spain^2

University of the Basque Country UPV-EHU, Alameda Urquijo s/n, Bilbao

48012, Spain^3

Ceramic Technology Institute, Ave Vicent Sos Baynat s/n, Castellon

12006, Spain^4

关键词: Biomass combustion;    Electrostatic precipitation;    Emissions control;    Experimental plans;    Fabric filtration;    Filtration velocity;    Hybrid filters;    Particulate matter emissions;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/28/1/012012/pdf
DOI  :  10.1088/1755-1315/28/1/012012

来源: IOP

【 摘 要 】

Control of particulate matter emissions by means of hybrid filter has been included in the experimental plan of a research project in the field of Mediterranean agro-forestry waste biomass combustion at medium scale. Application of hybrid filters to biomass combustion has not been thoroughly experimented so far. An identification of the most important parameters in particulate matter emissions control by means of a hybrid filter was undertaken. The filter involves two of the most significant technologies in fly ash emission control, electrostatic precipitation and fabric filtration A discussion of these parameters and principles of operation of said technologies is presented, as well as the final selection of parameters to be included in the experimental matrix of the project in regards to emissions control. A novel approach is proposed for testing of filtration velocity influence in fabric filter module without impacting on operation of electrostatic precipitation module.