Stability of the liquid particles separation in the apparatus of oil and gas systems

19th International Scientific Symposium in honor of Academician M.A. Usov "Problems of Geology and Subsurface Development"

Vasilevsky, M.V.^1 ; Zyatikov, P.N.^1 ; Burykin, A.Y.^1 ; Deeva, V.S.^1

Department of Geology and Oil Exploration Development, National Research Tomsk Polytechnic University, 30 Lenin Ave., Tomsk

634050, Russia^1

关键词: Control elements;    Film formations;    Liquid particle;    Particle separation;    Purification efficiency;    Purification method;    Separation process;    Separation systems;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/27/1/012020/pdf
DOI  :  10.1088/1755-1315/27/1/012020

来源: IOP

【 摘 要 】

The article considers the methods of associated gas purification from liquid particles. The sintering of liquid particles occurs during the separation process and the trapped droplets can be removed as a liquid stream, i.e. there is no need for unloading units. The droplet size depends on the energy input during their fragmentation. The efficiency of drops separation depends on the flow rate and the intensification of droplets coalescence, film formation and liquid flow to the receiver. The dispersion of the liquid particles is the main drawback of the existing purification methods, i.e. lack of sustainability of particle separation. The comparison of the separation system methods and the devices with flow control elements is carried out. The estimation of gas purification efficiency is conducted. It is concluded that the efficiency of associated gas purification gives the possibility to use it in turbine generators, heating furnaces, etc. It significantly reduces the proportion of gas being flared.