Integrated approach to gas accumulation identification in Field M

Scientific and Technical Challenges in the Well Drilling Progress

Malyshevskaya, K.^1,2 ; Rukavishnikov, V.^1 ; Belozerov, B.^2 ; Podnebesnikh, A.^2

Tomsk Polytechnic University, Tomsk, Russia^1

LLC Gazpromneft Science and Technology Center, Saint-Petersburg, Russia^2

关键词: Distribution of gas;    Facies distribution;    Fault interpretation;    Geological correlation;    Integrated approach;    Reservoir distribution;    Saturated reservoirs;    Seismic facies analysis;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/24/1/012048/pdf
DOI  :  10.1088/1755-1315/24/1/012048

来源: IOP

【 摘 要 】

The given paper describes how the integration of different methods, such as core data, well logs, production logging, seismic data and well test analysis, was used to solve the problem of determining gas accumulation boundaries in sediment complex PK1-3 of Field M. This paper is devoted to the block with wells 2, 36, 49, 85, 127, 148 of the field, since it is characterized by high uncertainty, sc. recently drilled wells 1V, 2V and 120 have produced oil, although according to the present-day geological concept they were considered to be gas saturated in the intervals investigated with production logging. Besides, well 127 that was presumably oil saturated has produced gas. By accounting mismatching production data and the geological concept, the authors have supposed that PK1-3 gas accumulation is characterized by a more complex structure than it was supposed by the predecessors and it is represented by reservoir compartmentalization and high heterogeneity. Therefore, the main goal of the work was to revise the distribution of gas saturated reservoir within the PK1-3 sediment complex. To achieve this goal, the authors have set the following tasks: to revise the geological correlation and gas oil contact; to carry out fault interpretation by means of seismic and well test data; to determine areal facies distribution on the basis of integrated core, perform a log motifs and seismic facies analysis. Thus, the estimation of the gas saturated reservoir portion was implemented in two stages: defining the boundary of gas accumulation in depth on the basis of well logs, production data and fault interpretation; reservoir distribution determination on the basis of the seismic facies analysis within the derived gas accumulation boundary.