Hydro-abrasive erosion: Problems and solutions

27th IAHR Symposium on Hydraulic Machinery and Systems

Winkler, K.^1

ANDRITZ HYDRO AG, Obernauerstrasse 4, Kriens

6010, Switzerland^1

关键词: Decision parameters;    Energy productions;    Erosion resistant;    Hydropower plants;    Influencing parameters;    Maintenance cost;    Particle parameters;    Problems and Solutions;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/22/5/052022/pdf
DOI  :  10.1088/1755-1315/22/5/052022

来源: IOP

【 摘 要 】

The number of hydro power plants with hydro-abrasive erosion is increasing worldwide. An overall approach is needed to minimize the impact of this phenomenon. Already at the start of the planning phase an evaluation should be done to quantify the erosion and the impact on the operation. For this, the influencing parameters and their impact on the erosion have to be known. The necessary information for the evaluation comprises among others the future design, the particle parameters of the water, which will pass the turbine, and the power plant owner's framework for the future operation like availability or maximum allowable efficiency loss, before an overhaul needs to be done. Based on this evaluation of the erosion, an optimised solution can then be found, by analysing all measures in relation to investments, energy production and maintenance costs as decision parameters. Often a more erosion-resistant design, instead of choosing the turbine design with the highest efficiency, will lead to higher revenue. The paper will discuss the influencing parameters on hydro-abrasive erosion and the problems to acquire this information. There are different optimisation possibilities, which will be shown in different case studies. One key aspect to reduce the erosion and prolong the operation time of the components is to coat all relevant parts. But it is very important that this decision is taken early in the design stage, as the design has to be adapted to the requirements of the coating process. The quality of coatings and their impact on the operation will be discussed in detail in the paper as due to the non-availability of standards many questions arise in projects.