Transient Simulation of Speed-No Load Conditions With An Open-Source Based C++ Code

27th IAHR Symposium on Hydraulic Machinery and Systems

Casartelli, E.^1 ; Mangani, L.^1 ; Romanelli, G.^1 ; Staubli, T.^1

Lucerne University of Applied Sciences and Arts, Department of Mechanical Engineering, Technikumstrasse 21, Luzern

6048, Switzerland^1

关键词: Computational methodology;    Hydraulic system;    No-load conditions;    Reliable methods;    Reversible pump-turbine;    Transient simulation;    Turbine operation;    Vortical structures;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/22/3/032029/pdf
DOI  :  10.1088/1755-1315/22/3/032029

来源: IOP

【 摘 要 】

Modern reversible pump-turbines can start in turbine operation very quickly, i.e. within few minutes. Unfortunately no clear design rules for runners with a stable start-up are available, so that certain machines can present unstable characteristics which lead to oscillations in the hydraulic system during synchronization. The so-called S-shape, i.e. the unstable characteristic in turbine brake operation, is defined by the change of sign of the slope of the head curve. In order to assess and understand this kind of instabilities with CFD, fast and reliable methods are needed. Using a 360 degrees model including the complete machine from spiral casing to draft tube the capabilities of a newly developed in-house tool are presented. An ad-hoc simulation is performed from no-load conditions into the S-shape in transient mode and using moving-mesh capabilities, thus being able to capture the opening process of the wicket gates, for example like during start-up. Beside the presentation of the computational methodology, various phenomena encounterd are analyzed and discussed, comparing them with measured and previously computed data, in order to show the capabilities of the developed procedure. Insight in detected phenomena is also given for global data like frequencies of vortical structures and local flow patterns.