Flow field study in a bulb turbine runner using LDV and endoscopic S-PIV measurements

27th IAHR Symposium on Hydraulic Machinery and Systems

Lemay, S.^1 ; Fraser, R.^1 ; Ciocan, G.D.^1 ; Aeschlimann, V.^1 ; Deschênes, C.^1

Laval University, QC, Canada^1

关键词: Direction of rotation;    Endoscopic camera;    Laser Doppler Velocimetry;    Measurement campaign;    Measurement configuration;    Measurement techniques;    Stereoscopic particle image velocimetry;    Technical aspects;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/22/2/022015/pdf
DOI  :  10.1088/1755-1315/22/2/022015

来源: IOP

【 摘 要 】

The flow in the inter-blade channels of a bulb turbine was measured using two different techniques. The first involved a classical laser Doppler velocimetry (LDV) setup whereas the second integrated endoscopic cameras to a stereoscopic particle image velocimetry (S-PIV) system. This paper presents results from both measurement campaigns and also provides some key conclusions based on the two datasets. Before getting into the thick of the data though, the technical aspect of both measurement configurations is addressed. A quick overview of the LDV setup is presented, but the main focus is on the novelties and challenges brought by the use of endoscopic cameras to achieve S-PIV measurements between the runner blades. Endoscopic PIV systems have already led to successful measurements of flow fields in a few studies concerning turbomachinery, especially in aerodynamics. However, to the author's knowledge, the realisation of such measurements in a hydraulic turbine is a first. After this outline of the techniques used, the results and conclusions are shown. First, the influence of the guide vanes wakes on the runner flow is described. The size, localisation, strength and dissipation of those structures are inferred from the information coming from both measurement techniques. Then, a flow imbalance is assessed circumferentially. On another subject, the blade tip vortices are identified and characterized using the LDV data. The size, position and direction of rotation of those structures are all extracted from the measured flow field. Finally, the PIV data allows the identification of yet another vortex located near the suction side of the blades and originating from the corner between the leading edge and the hub when operating the bulb turbine at part load.