Equipment for fully homologous bulb turbine model testing in Laval University

27th IAHR Symposium on Hydraulic Machinery and Systems

Fraser, R.^1 ; Vallée, D.^1 ; Jean, Y.^1 ; Deschênes, C.^1

Laval University, QC, Canada^1

关键词: Accurate measurement;    Hydraulic machines;    ITS applications;    Mandatory tests;    Performance capability;    Power-to-weight ratios;    Renewable energies;    Turbine modeling;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/22/2/022014/pdf
DOI  :  10.1088/1755-1315/22/2/022014

来源: IOP

【 摘 要 】

Within the context of liberalisation of the energy market, hydroelectricity remains a first class source of clean and renewable energy. Combining the growing demand of energy, its increasing value and the appreciation associated to the sustainable development, low head sites formerly considered as non-profitable are now exploitable. Bulb turbines likely to equip such sites are traditionally developed on model using right angle transmission leading to piers enlargement for power take off shaft passage, thus restricting possibilities to have fully homologous hydraulic passages. Aiming to sustain good quality development on fully homologous scale model of bulb turbines, the Hydraulic Machines Laboratory (LAMH) of Laval University has developed a brake with an enhanced power to weight ratio. This powerful brake is small enough to be located in the bulb shell while dissipating power without mandatory test head reduction. This paper first presents the basic technology of this brake and its application. Then both its main performance capabilities and dimensional characteristics will be detailed. The instrumentation used to perform accurate measurements will be finally presented.