Characterization of Hemp-Lime Bio-Composite

Central Europe towards Sustainable Building

生态环境科学

B., Pietruszka ; M., Golbiewski ; P., Lisowski

Building Research Institute, Department of Thermal Physics Acoustics and Environment, 21 Ksawerów Street, Warszawa

02-656, Poland^1

Warsaw University of Technology, Faculty of Architecture, Department of Structural Design, Building Technology and Technical Infrastructure, Koszykowa Street, Warszawa

00-659, Poland^2

关键词: Construction technique;    Healthy indoor environments;    Hygrothermal properties;    Insulation materials;    Load-bearing materials;    Low-carbon emissions;    New building materials;    Numerical simulation method;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/290/1/012027/pdf
DOI  :  10.1088/1755-1315/290/1/012027

学科分类：环境科学（综合）

来源: IOP

【 摘 要 】

Hemp-lime bio-composite (hempcrete) is a new building material consisting of two main constituents: Hemp shiv and lime-based binder. Hemp shiv is a woody core of Cannabis Sativa plant obtained in decortication process and chopped into particles. Lime-based binder is a mix of binders with highest content of hydrated lime (other ingredients often present in a mix are: Natural hydraulic lime, pozzolans, cement and others). Its natural origin, ability to crate healthy indoor environment, good thermal properties and especially high ecological values (including low carbon emission in the entire life-cycle) makes it an sustainable alternative to commonly used materials in construction industry. Due to its mechanical properties hempcrete is not a load-bearing material. It is used as a filling material for single-layer walls with a structural frame and as an insulation material for existing walls, floors and roofs. Construction techniques include forming monolithic walls by compacting the mix in a formwork, spraying, bricklaying from precast blocks and prefabrication of entire wall elements. In this paper the results of mechanical and hygrothermal properties of the developed hemp-lime composites will be presented. The results will be used to obtain the hygrothermal characteristics of the building partitions applying numerical simulation methods.