Reconstructing past landslide models based on subsurface resistivity profiles: case study from Majene West Sulawesi

International Conference on Geoscience

Arsyad, Ardy^1 ; Aswad, Sabrianto^2 ; Syamsuddin, Erfan^2

Department of Civil Engineering, Faculty of Engineering, Hasanuddin University, Makassar, Indonesia^1

Study Program of Geophysics, Faculty of Mathematics and Natural Science, Hasanuddin University, Makassar, Indonesia^2

关键词: Electrical resistivity tomography;    Failure plane;    Geological formation;    Geotechnical investigations;    Mitigation strategy;    reconstructing;    Resistivity models;    Resistivity profile;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/279/1/012039/pdf
DOI  :  10.1088/1755-1315/279/1/012039

来源: IOP

【 摘 要 】

This paper presents a case study of reconstructing past landslide failure models in a napal geological formation by undertaking a series of geoelectrical tomographies and geotechnical bor-SPT surveys. Study area is located in the National Artery Road 135 Kilometres, Majene-Mamuju, West Sulawesi. Geological formation found in the area is Napal Pambauang Formation. Massive ground movement is obviously detected in the area, and several landslide events have been occured in the last 10 years. In order to derive an effective technnique of mitigating the landslide in the area, past landslide failure models are needed to reconstruct. Therefore, 2D geoelectric tomographies survey combined several geotechnical bors were undertaken. A Framework of geophysics and geotechnical investigations was developed and implemented. The results show that slope failure models can be mapped, following unique patterns in the subsurface resistivity models. The finding slope failure models are well agreement with successive scarp patterns founded in the slope area. Past and recent landslides and future landslide are derived and this can be employed to design effective landslide mitigation strategies.