Production and Application of Aggregate Manganese Zeolite Greensand using Post Cartridge Micron as Absorbent Fe and Mn Ions

International Conference on Life Sciences and Technology

Ricky Wijaya, Anugrah^1 ; Wonorahardjo, Surjani^1 ; Kartika Kusumaningrum, Irma^1 ; Alfini'matin, Dwi^1 ; Hertanto, Pungky^1 ; Avila, Shila^1 ; Daupor, Hasan^2 ; Hossain, Md. Sazzad^3 ; Hendrik Sanjaya, Eli^1^4

Department of Chemistry, Faculty of Mathematics and Natural Science, Universitas Negeri Malang, Jl. Semarang No. 5, Malang

65145, Indonesia^1

Chemistry Major, Faculty of Science Technology and Agriculture, Yala Rajabhat University, Yala

95000, Thailand^2

Department of Aquaculture, Faculty of Fisheries, Bangladesh Agricultural University (BAU), Mymensingh

2202, Bangladesh^3

Department of Civil and Environmental Engineering, School of Engineering, Tohoku University, 6-6-04, Aramaki Aza Aoba Aoba-ku, Miyagi, Sendai

980-8579, Japan^4

关键词: Aggregate materials;    Calibration curves;    Cartridge designs;    Concentration of fe;    Energy dispersive x-ray;    Lapindo mud;    post cartridge micron;    Well water;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/276/1/012007/pdf
DOI  :  10.1088/1755-1315/276/1/012007

来源: IOP

【 摘 要 】

The purpose of this study was to produce an aggregate of fine manganese greensand and its applications using micron cartridge design for absorbing Fe3+and Mn2+ ions in the well water affected by the Lapindo mud. The fine manganese greensand was made using the flame spray pyrolysis. The combination of aggregate material and the bulk manganese greensand were performed with the adding filler with the varied compositions of CaO, CaCO3, and white cement as the adhesive. Characterization of topography, morphology, and composition of aggregate manganese greensand was performed using SEM-EDX (Scanning Electron Microscope-Energy Dispersive X-Ray). Applications of the aggregate manganese greensand and activated carbon were designed in several post cartridge microns for well water samples. Initial and final measurement the concentration of Fe and Mn solution using a calibration curve by AAS method (Atomic Absorbance Spectrophotometer). The results showed that the aggregate A with a composition of fine manganese greensand: bulk manganese greensand: CaCO3: CaO and white cement is 2:5:1:1:1:1 and aggregate B (3:4:1:1:1) absorbed maxima ions of Mn (97.5%) and Fe (80.3%) in the well water sample, respectively. Besides, the profile of spectrum SEM-EDAX indicated the aggregate A and B interacting with filler which showed the active situs as exchange cation for absorbing Fe3+ and Mn2+ ions.