Resource-Saving Technology of Wastewater Treatment of Factories of Reinforced Concrete

International science and technology conference "Earth science"

Moskvicheva, A.V.^1 ; Shchitova, T.V.^2 ; Ibragimova, Z.K.^1

Department of Water Supply, Wastewater Volgograd State Technical University, Lenin avenue, 28, Volgograd

400005, Russia^1

Department of Construction of the Institute of Service, Tourism and Design (Branch), North Caucasus Federal University in Pyatigorsk, 40 let Octyabrya street, 56, Pyatigorsk

357500, Russia^2

关键词: Electrical conductivity;    Electrochemical treatments;    Electrode material;    Electrolyte compositions;    Experiment planning;    Purification process;    Resource-saving technologies;    Secondary Raw Materials;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/272/2/022083/pdf
DOI  :  10.1088/1755-1315/272/2/022083

来源: IOP

【 摘 要 】

A low-waste resource-saving technology for wastewater treatment from emulsified contaminants at the construction industry enterprises was developed. The technology allows reusing purified water, processing organic pollutants into secondary raw materials. Laboratory and industrial tests were carried out. The experimental data were obtained with the use of instruments, equipment, providing the required accuracy, reliability of the measurement results, processed using the mathematical statistics of experiment planning, confirmed by implementation in production. The conditions for the destruction of water-organic emulsions by a constant electric current in a device with insoluble anodes have been studied. The main factors were identified and analyzed: electrode material, solution electrical conductivity, current density, electrolyte composition, hydrogen value, temperature and processing time. The optimal parameters of the purification process are established. The kinetics of the process has been studied. A probabilistic mechanism for the destruction of emulsified organic substances in the investigated medium is presented. On the experimental unit, the operations of averaging, sedimentation, electrochemical treatment, secondary sedimentation and the return of purified water to the technological cycle were worked out and introduced into production. The technological regulations were developed.