Study on the Treatment of Aluminum Milling Wastewater by Electrode-Fenton Method

2019 3rd International Workshop on Renewable Energy and Development

能源学;生态环境科学

Li, Ru^1 ; Wang, Peng^1 ; Gu, Junli^1

Department of Resources and Civil Engineering, Northeastern University, Shenyang

110819, China^1

关键词: Aeration intensity;    Biochemical treatments;    Concentration of fe;    Electro-Fenton method;    Fenton reactions;    Fitting equations;    Optimum conditions;    Removal rate of cods;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/267/4/042137/pdf
DOI  :  10.1088/1755-1315/267/4/042137

学科分类：环境科学（综合）

来源: IOP

【 摘 要 】

Aluminum alloy chemical milling wastewater is the wastewater produced in the washing process after aviation aluminum chemical milling. According to its characteristics of high alkalinity, high concentration of organic compounds and difficult biochemical treatment, the electro-Fenton method was used in this study. Electro-Fenton method mainly is the Fenton reaction between Fe2+ and hydrogen peroxide produced by electrolytic dissolved oxygen to produce HO⋅, which reacts with organic pollutants and mineralizes. In the experiments, activated carbon fiber and Ti/RuO2 - IrO2 were used as the cathode and the anode, respectively. The experiments showed that the optimal initial pH value of degradation was 3, voltage was 40V, and the concentration of Fe2+ was 0.5mmol/L, plate spacing was 5cm, the concentration of Na2SO4 was 10g/L, the aeration intensity was 125L/h, and the reaction time was 120min, the average removal rate of COD was over 50%. Under optimum conditions, the study established a dynamic model and educed that it could be described with first order dynamic model. The fitting equation is: Cr =C0 exp(-1.2879C 0-0.8253 t).