Application of Response Surface Method in Modification of Virtual Material Model

2018 4th International Conference on Environmental Science and Material Application

生态环境科学;材料科学

Cui, Fangyuan^1 ; Hua, Dengxin^1 ; Li, Yan^1 ; Li, Pengyang^1 ; Yang, Mingshun^1

School of Mechanical and Precision Instrument Engineering, Xi'An University of Technology, Shaanxi, China^1

关键词: Mechanical joints;    Micro characteristics;    Modelling techniques;    Response surface method;    Surface characteristics;    Thickness parameters;    Virtual materials;    Weakening effect;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/252/2/022059/pdf
DOI  :  10.1088/1755-1315/252/2/022059

来源: IOP

【 摘 要 】

Virtual material model is an effective equivalent modelling technique to simplify and characterize the stiffness weakening effect of mechanical joints. In order to further improve the accuracy of virtual material model, the density and thickness parameters of virtual material model were optimized and modified by response surface method. The advantage of this method is that under the condition of maintaining the original surface characteristics of the joint, the micro-characteristics of the joint under certain pre-tightening conditions can be quantitatively characterized macroscopically, which makes the analysis results more close to the actual situation. The natural frequencies of the virtual material model before and after modification are compared with the experimental natural frequencies, and the validity of the method and the modified model are verified.