Optimization Analysis and NC Simulation Processing of the Wheel-Mold

4th International Conference on Energy Equipment Science and Engineering

Wang, Guo-Qiang^1^2 ; Hongyan, Sun^3 ; Xujun, Zhai^2

Key Laboratory of Modern Agricultural Equipment and Technology, Ministry of Education, Jiangsu University, Zhenjiang, Jiangsu

212013, China^1

Department of Agricultural Engineering, Jiangsu Agriculture and Animal Husbandry Science and Technology Vocational College, Taizhou, Jiangsu

225300, China^2

Taizhou College of Nanjing Normal University, Taizhou, Jiangsu

225300, China^3

关键词: Automobile wheels;    CNC machine tools;    Cnc programming;    Deformation displacements;    Design-to-manufacturing;    NC simulation;    Optimization analysis;    Processability;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/242/3/032017/pdf
DOI  :  10.1088/1755-1315/242/3/032017

来源: IOP

【 摘 要 】

The structure of the wheel hub was analyzed by the topology optimization module in the Workbench. According to the analysis results, the structure of the wheel hub was redesigned. Comparing the optimization of the deformation displacement, stress and quality of the wheel to before, it can be found, the deformation of the wheel displacement is ignored, but the quality is reduced from 9.5693kg to 7.3619kg, which achieves the purpose of car lightweight. Finally, the CNC programming module of CATIA software is used to simulate the machining of the automobile wheels, and the G code is executed by the CNC machine tool. The processability and processing efficiency of the products are improved accordingly, which shortens the products from design to manufacturing, and greatly enhances the competitiveness of enterprises.