Load Distribution Analysis for The Plastic Helical Gear Meshing with Steel Worm

4th International Conference on Advances in Energy Resources and Environment Engineering

能源学;生态环境科学

Yun, Yonghu^1^2 ; Hu, Hong^1 ; Ta, Jingning^2

Shenzhen Graduate School, Harbin Institute of Technology, Shenzhen Guangdong

518005, China^1

Johnson Electric Company Corporate Engineering, Shenzhen Guangdong

518125, China^2

关键词: Ansys workbenches;    Applied loads;    Contact points;    Deformation compatibility;    Fast calculations;    Load distributions;    Loading capacities;    Meshing forces;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/237/3/032080/pdf
DOI  :  10.1088/1755-1315/237/3/032080

学科分类：环境科学（综合）

来源: IOP

【 摘 要 】

This paper presents an approach for the analysis of load distribution of plastic helical gear meshing with steel worm. Based on the deformation compatibility assumption in the gear mesh process, the load on the contact point of each gear is calculated. By calculating the applied load on each gear tooth in a meshing cycle, the load distribution on the gear tooth is obtained. As compared with the finite element method, the presented method result correlates well with the simulation result with the ANSYS Workbench. The method presented in this paper realizes the fast calculation of meshing force between plastic helical gear and steel worm, which can provide some references for gear design and gear loading capacity improved in engineering.