Analysis of Temperature Field and Design of Temperature and Humidity Control in Green Energy Saving Maintenance Room of Cement Products

2018 International Conference on Construction, Aviation and Environmental Engineering

生态环境科学;生物科学

Wang, Heng^1 ; Cao, Shukun^1 ; Cui, Yi^1 ; Xu, Shuqiang^1 ; Cao, Zijian^1 ; Song, Xiangwen^1 ; Shen, Hao^1

School of Mechanical Engineering, University of Jinan, Jinan, Shandong Province

250022, China^1

关键词: Blowing-in;    Cement products;    Green energy savings;    Hot air;    Insulation performance;    Optimum temperature;    Temperature and humidities;    Temperature and humidity control;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/233/5/052045/pdf
DOI  :  10.1088/1755-1315/233/5/052045

来源: IOP

【 摘 要 】

This paper proposes a green energy-saving maintenance room.The maintenance room can solve most of the problems faced by most cement product curing rooms during use. For example, poor insulation performance and low level of automation.according to the specific requirements of the maintenance of room temperature and humidity, a cement room temperature and humidity control system was designed to detect and control the temperature, humidity and other parameters of the cement product curing room. The temperature field during the operation of the green energy-saving room through ANSYS was analyzed. The results showed that the optimum temperature of solar hot air blowing in the curing room was 70°C.