The effects of CaCO3 on the properties of PCL wood-plastic composites

2018 International Conference on Construction, Aviation and Environmental Engineering

生态环境科学;生物科学

Zhang, Qiong^1^2 ; Li, Yi^1^2 ; Wen, Jun^1^2 ; Yuan, Song^1^2 ; Zhu, Zhifeng^1^2

Jiangsu Xuzhou Construction Machinery Research Institute, 221004, China^1

State Key Laboratory of Intelligent Manufacturing of Advanced Construction Machinery, Xuzhou Construction Machinery Group, 221004, China^2

关键词: Melt flow rate;    Wood plastic composite;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/233/2/022004/pdf
DOI  :  10.1088/1755-1315/233/2/022004

来源: IOP

【 摘 要 】

The effects of CaCO3 on the properties of PCL wood-plastic composites were studied in this paper. The strength and the melt flow rate of the composites increased first and then decreased with the content of CaCO3, and up to maximum while the content of CaCO3 is 30%. Gaps and holes could be seen from the SEM figure in the composites when the content of CaCO3 is more than 30%. Above all, the best content of CaCO3 in the composites is 30%.