Analysis and Simulation of Typical Faults in 500kV UPFC Station based on PSCAD/EMTDC

2018 International Conference on Advanced Technologies in Energy, Environmental and Electrical Engineering

能源学;生态环境科学;无线电电子学

Chang, Jiyan^1 ; Han, Yanan^1 ; Li, Peng^2

Power System Department of China Electric, Power Research Institute, Beijing

100192, China^1

Jiangsu Electric Power Company Research Institute, Nanjing

211103, China^2

关键词: Analysis and simulation;    Demonstration project;    Electro-magnetic transient;    Equipment parameters;    Protect coordinations;    Science and Technology;    System operation modes;    Typical faults;   

Others  :  https://iopscience.iop.org/article/10.1088/1755-1315/223/1/012001/pdf
DOI  :  10.1088/1755-1315/223/1/012001

学科分类：环境科学（综合）

来源: IOP

【 摘 要 】

The 500kV UPFC demonstration project of Jiangsu Suzhou south grid was put into operation in December 19, 2017. Depending on the State Grid science and technology project "Study on control and protect coordination of 500kV UPFC" and according to the system operation mode and equipment parameters provided by the relevant institutes, the authors had researched on electromagnetic transient modelling and simulation of 500kV Suzhou south grid and 500kV UPFC in earlier period. In this paper, the theoretical analysis and simulation verification of several typical faults in 500kV UPFC station are carried out by using the above model, which is an important part of the project.