Optimisation of parameters for detection of manganese ion using electrochemical method

International Conference on Mechanical Engineering, Energy and Advanced Materials

机械制造;能源学;材料科学

Gilbert, R.^1 ; Siddiquee, S.^1 ; Saallah, S.^1 ; Lal, Tamrin M^2

Biotechnology Research Institute, University Malaysia Sabah, Jalan UMS, Sabah, Kota Kinabalu

88400, Malaysia^1

Borneo Research Marine Institute, University Malaysia Sabah, Jalan UMS, Kota Kinabalu, Sabah

88400, Malaysia^2

关键词: Accumulation time;    Differential pulse voltammetry;    ELectrochemical methods;    Gold electrodes;    High sensitivity;    Limit of detection;    Optimal conditions;    Redox indicator;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/606/1/012009/pdf
DOI  :  10.1088/1757-899X/606/1/012009

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

An electrochemical method was detected a heavy metal ion of manganese (Mn2+) based on bare gold electrode (AuE). The bare AuE was optimized including various type of electrolytes, redox indicators, pH, scan rate and accumulation time using cyclic voltammetry (CV). From the CV results, the optimal conditions of Mn2+ were found of Tris-HCl (0.1 M, pH 2) buffer for electrolytes supported by 5 mM Prussian blue as a redox indicator with scan rate of 100 mVs-1 and accumulation time of 2 s, respectively. Differential pulse voltammetry (DPV) method was detected with different concentrations of Mn2+ on the ranged from 0.05 to 1.0 ppm with limit of detection (LOD) of 0.075 mg L-1 (S/N=3). A linear regression was found of 0.9659 (r2). The above results indicated that the bare AuE was unable to detect of Mn2+ below safety level. So, the proposed method suggests to detect below safety level of Mn2+ based on the further modification of AuE with high sensitivity, selectivity and accuracy.