Effect of Inertia Weight of PSO on Optimal Placement of DG

International Conference on Startup Ventures: Technology Developments and Future Strategies

社会科学（总论）

Maurya, Harsh^1 ; Kumar Bohra, Vivek^1 ; Singh Pal, Nidhi^1 ; Singh Bhadoria, Vikas^2

Department of Electrical Engineering, School of Engineering, Gautam Buddha University, Greater Noida (UP), India^1

Department of Electrical and Electronics Engineering, ABES Engineering College, Ghaziabad (UP), India^2

关键词: Distribution systems;    IEEE 33-bus;    Inertia weight;    Location identification;    Optimal placements;    Particle swarm optimization technique;    Radial distribution networks;    Sensitivity methods;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/594/1/012011/pdf
DOI  :  10.1088/1757-899X/594/1/012011

学科分类：社会科学、人文和艺术（综合）

来源: IOP

【 摘 要 】

Integrating Distributed Generation (DG) at appropriate location in distribution system can reduce its real power losses and can also increase the voltage regulation. Optimal allocation of DG has two parts, i) location identification of DG, ii) capacity determination of DG. This article uses loss sensitivity methods for fixing of optimal place of DG and then Particle Swarm Optimization (PSO) technique is implemented for determination of optimal size of DG at that location. During optimization, effect of inertia weight of PSO on the optimal placement of DG is demonstrated in this paper. For detailed study, IEEE 33-bus system is considered and impact of integration DG in the system is also shown.