Preparation and Properties of Needle-punched Woven Quartz Fiber Reinforced SiO2 Ceramic Matrix Composites

International Conference on Manufacturing Technology, Materials and Chemical Engineering

材料科学;化学工业

Su, Tong^1^3 ; Luan, Qiang^1^3 ; Wei, Qihong^1^3 ; Wang, Hongsheng^1^3 ; Liu, Xiaojun^1^3 ; Shi, Jiang^1^3 ; Gao, Wenqiu^1^3 ; Shao, Changtao^1^3 ; Wang, Yuhong^2^3

Shandong Industrial Ceramics Research and Design Institute Co., Ltd., Zibo, Shandong

255000, China^1

Shandong Building Materials Industry Design and Research Institute, Jinan, Shandong

250000, China^2

No. 128, Yumin Road, Zibo City, Shandong Province, China^3

关键词: Energy spectra;    Inter-laminar shear strengths;    Interfacial property;    Liquid phase infiltration;    Molding process;    Orders of magnitude;    Properties of composites;    Toughening mechanisms;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/592/1/012038/pdf
DOI  :  10.1088/1757-899X/592/1/012038

学科分类：材料科学（综合）

来源: IOP

【 摘 要 】

The needle-punched woven silica fiber reinforced SiO2 ceramic matrix composites were prepared by liquid phase infiltration-in-situ solidification molding process. The prepared composites have high density and good uniformity, and the mechanical properties of the composites at room temperature. Microstructure, interfacial properties and dielectric properties at room temperature were investigated, and the strengthening and toughening mechanism of acupuncture-woven quartz fiber reinforced SiO2 ceramic matrix composites was discussed. The mechanical properties at room temperature show that the tensile strength, flexural strength, compressive strength and interlaminar shear strength of the composites reach 35.6MPa, 79.0MPa, 122.0MPa, 11.9MPa, respectively. Scanning electron microscopy (SEM) and energy spectrum of the fractures of the samples (EDS) observation and analysis showed that there was no interfacial reaction between the matrix and the fiber, and the interface was suitable. The main factors that improve the mechanical properties of composite materials at room temperature are crack steering, expansion barriers, and fiber pull-out. The dielectric properties of the composite at room temperature do not change or change much under different X, Ka, and Ku conditions. As the bulk density increases, the dielectric constant of the composite increases gradually, and the loss tangent is always maintained at 10-3 orders of magnitude.