Automation of the lamination process for automotive applications

7th Modern Technologies in Industrial Engineering

工业技术（总论）

Popa, L.^1 ; Popa, V.^2

Transilvania University, Faculty of Electrical Engineering and Computer Science, Department of Automation and Information Technologies, Mihai Viteazul, No.5, Brasov

500036, Romania^1

National Defence University, Department of Defence Resources Management Studies, Mihai Viteazul, No. 160, Brasov

500183, Romania^2

关键词: Automation structures;    Automation systems;    Automotive applications;    Cutting operations;    Distributed intelligence;    Laminated structures;    Lamination process;    Programmable machines;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/591/1/012097/pdf
DOI  :  10.1088/1757-899X/591/1/012097

学科分类：工业工程学

来源: IOP

【 摘 要 】

The article addresses the design of an automation system for the lamination process of the cars, which has as inputs different types of transducers, and as outputs the command of a linear pneumatic motor. The layered and self-supporting laminated structures of motor vehicles are manufactured from a thermoplastic substrate and a flexible sheet material in one direction rolling and cutting operation. The installation for producing these laminates is a casting press having two casting plates, each of which comprises a component of a pair of cutting means. It is used a CPU 315-2 PN/DP, which is a medium-sized program memory processor and it is often used in automation structures. This processor can also be used as distributed intelligence (master or slave). The implementation of the code sequence to work on this processor is done in one of the specific languages to the programmable machines. The software used in programming is STEP 7. The stored information is not erased when the processor is disconnected. The usefulness of programmable machines has simplified the approach of an automated system.