Study of the influence of surface roughness parameters on the frictional characteristics of materials

7th Modern Technologies in Industrial Engineering

工业技术（总论）

Pena-Paras, L.^1 ; Maldonado-Cortes, D.^1 ; Martinez, C.^1 ; Arias, M.^1 ; Ontiveros, A.^1 ; Castanos, B.^1 ; Morales-Martinez, M.^1

University of Monterrey, Engineering Department, Ave, Morones Prieto 4500 Pte., San Pedro Garza García

66238, Mexico^1

关键词: 3-D surface measurement;    Coefficient of frictions;    Frictional characteristics;    Industry standards;    Positive correlations;    Sliding conditions;    Surface roughness characteristics;    Surface roughness parameters;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/591/1/012025/pdf
DOI  :  10.1088/1757-899X/591/1/012025

学科分类：工业工程学

来源: IOP

【 摘 要 】

The study of surface roughness parameters and their correlation with coefficient of friction (COF) is of great importance for metal-mechanic applications. Evidence suggests that Ra (surface roughness average) is not directly related to COF under sliding conditions. In this study, the relation between surface roughness parameters, namely Ra, Rt (maximum height of the profile), Δa (mean slope of the profile), and COF, as well as their interactions, were particularly studied. The materials were of an aluminium alloy Al A380. Samples were chemically attacked to modify their surface roughness characteristics. Six different conditions were tested: Al A380 with the surface attacked with an alkaline substance for 0, 2.5, 5, 15, 30 and 60 min. The value of COF was determined using a T-05 block-on-ring tribotester, and surface roughness data was obtained using an optical 3D surface measurement system. MathWorks MATLAB software was used to process the data. Results show that Δa has a strong positive correlation with COF during sliding conditions, whereas both Ra and Rt may vary without directly affecting COF, contrary to the commonly used industry standard.