3D-printed polyether ether ketone samples mechanical properties estimation

Modern Engineering

工业技术（总论）

Sviridov, A.^1 ; Lopatina, Iu^1 ; Kurganova, Iu^2

Fed. State Budgetary Sci. Inst. 'Federal Scientific Agroengineering Center VIM' (FSBSI FSAC VIM), Russia^1

Bauman Moscow State Technical University, 5 Second Baumanskaya Street, Moscow

105005, Russia^2

关键词: Additive methods;    Elasticity moduli;    Mechanical characteristics;    Mechanical properties estimation;    Relative elongations;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/589/1/012021/pdf
DOI  :  10.1088/1757-899X/589/1/012021

学科分类：工业工程学

来源: IOP

【 摘 要 】

This paper is dedicated to study of mechanical characteristics (tensile limit, elasticity modulus and relative elongation) of samples made of polyether ether ketone by additive method FDM (FFF). The paper includes results of mechanical tests on tension of sample party and comparison to results of other authors. Conclusions on reasons of the results obtained are made.