Lower Explosion Limits Measurements and Prediction for Binary Liquid Mixtures

5th Annual International Workshop on Materials Science and Engineering

Cao, Jiakai^1 ; Ding, Li^2 ; Pan, Yong^1 ; Zhao, Jianping^1

Jiangsu Key Laboratory of Hazardous Chemicals Safety and Control, Nanjing Tech University, Nanjing

210009, China^1

School of Automotive and Rail Transit, Nanjing Institute of Technology, Nanjing

211167, China^2

关键词: Average absolute error;    Binary-liquid mixtures;    Fire and explosion hazards;    Inherently safer design;    Multiple linear regressions;    Multiple nonlinear regression;    Physicochemical parameters;    Satisfactory predictions;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/585/1/012072/pdf
DOI  :  10.1088/1757-899X/585/1/012072

来源: IOP

【 摘 要 】

The lower explosion limit (LEL) is an important physicochemical parameter for characterizing the flammable and explosive hazard potential of chemicals. In this study, the LEL values of 21 groups of binary liquid mixtures with different compositions and ratios were tested, and the change law of LEL with compositions and ratios were revealed. Then four different physicochemical parameters were employed as the input parameters for the LEL prediction of mixtures. Both the multiple linear regression (MLR) and multiple nonlinear regression (MNR) methods were employed to model the possible quantitative relationships between these parameters and the LEL of binary mixtures. The resulted models showed satisfactory prediction ability, with the average absolute error being 0.188% for the MLR model and 0.196% for the MNR model, respectively. Model validations were also performed to check the stability and predictivity of the presented models, and the results showed that both models were valid and predictive requiring only some common physicochemical parameters of the pure components. This study can provide a simple, yet accurate way for engineering to predict the LELs of binary liquid mixtures as applied in the assessment of fire and explosion hazards and the development of inherently safer designs for chemical processes.