Development of lightweight composites based on foam glass aggregate

International Conference Building Materials, Products and Technologies

材料科学;工业技术（总论）

Zach, J.^1 ; Sedlmajer, M.^1 ; Bubenik, J.^1 ; Drdlova, M.^2

Brno University of Technology, Faculty of Civil Engineering, Centre AdMaS, Purkyova 139, Brno

61200, Czech Republic^1

Research Institute for Building Materials, Hnvkovského 30/65, Brno

61700, Czech Republic^2

关键词: Building industry;    Coefficient of thermal conductivities;    Light weight aggregate;    Lightweight composites;    Low thermal conductivity;    Mechanical parameters;    Physicomechanical properties;    Waste glass powder;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/583/1/012016/pdf
DOI  :  10.1088/1757-899X/583/1/012016

来源: IOP

【 摘 要 】

Building composites based on various types of lightweight aggregate have been widely used in the last decades for production of precast elements (e.g. panels) or whole structures with a good thermal insulation/mechanical properties ratio. The presented research investigated the feasibility of using foam glass aggregate, prepared from waste glass powder, in lightweight insulating composites for building industry. The effect of various binders (both organic and inorganic), binder/filler ratios and 3 types of fibres addition (PET, cellulose and mineral wool waste) on the physico-mechanical properties (bulk density, compressive strength) and thermal conductivity of the composite was evaluated. The results indicate, that applicable composites with sufficient mechanical parameters and low thermal conductivity (coefficient of thermal conductivity about 0,09 W/(m•K) can be prepared using both types of binders.