Analysis of an experimental tension structure

11th International Scientific Conference of Civil and Environmental Engineering for PhD. Students and Young Scientists

土木建筑工程;生态环境科学

Kapolka, L.^1

Department of Structural Engineering, Faculty of Civil Engineering, Technical University of Kosice, Koice

042 00, Slovakia^1

关键词: Experimental devices;    Hyperbolic paraboloids;    Input datas;    Technical universities;    Tension structure;    Weight distributions;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/566/1/012014/pdf
DOI  :  10.1088/1757-899X/566/1/012014

来源: IOP

【 摘 要 】

This article builds on the article written last year. The paper is the comparison between the results from the first numerical pre-analysis of the construction of an adaptive hyperbolic paraboloid, the results of which were used as input data for the design of the experimental device in the laboratory at the Faculty of Civil Engineering of the Technical University in Koice with the newest results gained from the numerical model created according to documentation from the manufacturer of this device. The structural numerical model was modeled in regard to geometry, materials and cross-sections characteristics, weight distribution, existing eccentricity and it was created in Dlubal software based on finite element method.