Determination of input parameters necessary for the design of the polder in the Horná Topl'a basin, Slovakia

11th International Scientific Conference of Civil and Environmental Engineering for PhD. Students and Young Scientists

土木建筑工程;生态环境科学

Fijko, R.^1

Technical University of Kosice, Faculty of Civil Engineering, Department of Environmental Engineering, Vysokokolská 4, Koice

042 00, Slovakia^1

关键词: Flood protection;    Flood waves;    Input datas;    Input parameter;    Map data;    Retention capacity;    Slovakia;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/566/1/012008/pdf
DOI  :  10.1088/1757-899X/566/1/012008

来源: IOP

【 摘 要 】

In the last decade, there have been many destructive floods in various parts of Slovakia. Despite the extensive investment in flood control works, there are only small changes and neither flood occurrences nor damages are decreasing. A possible consequence of climate change is an increased frequency of extreme meteorological events that may cause floods. The determination of the occurrence of these extreme hydrological phenomena in a particular catchment is directly subject to the input data in dependence on climatic and geomorphological processes. This article deals with the method of comparing the retention capacity of the polder by means of geographic information systems (GIS) compared to the results from map data and design of flood wave diagram for the river of Banský Stream. This proposal is part of the flood protection of the area of ergov Mountain in eastern Slovakia where is designed the system of polders.