Analysis on the Condition of Motorcycle Using High Speed Climbing

7th Annual International Conference on Materials Science and Engineering

Zheng, Bin^1 ; Wang, Xin^1 ; Yu, Xinggang^1 ; Liu, Xiayong^1 ; Li, Lishan^1 ; Xiao, Feng^1

Institution of Transportation and Automobile Engineering, Panzhihua University^1

关键词: Engine speed;    High Speed;    Inertia force;    Low speed;    Motorcycle engines;    Transmission systems;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/562/1/012168/pdf
DOI  :  10.1088/1757-899X/562/1/012168

来源: IOP

【 摘 要 】

In view of the situation that motorcycle will encounter with climb, the driver will choose to switch into low speed for climbing ahead of time. Drivers can also use high speed inertia force in high gear to increase the throttle for climbing without reducing gear. Using of high speed climbing motorcycle may appear normal engine speed but the actual speed is slow or the engine speed down or engine flue or transmission system tooth phenomenon. These phenomena will cause different degrees of wear or even damage to the corresponding parts. The reasons for above phenomenon of motorcycle climbing with high speed are researched and analyzed from three aspects. They are respectively inside structure of the motorcycle engine, the clutch part and the transmission system. Therefore, reasonable use of gear climbing can effectively extend the service life of motorcycle.