The use of nanomaterials to improve the wear resistance of machine parts under fretting corrosion conditions

International Conference on Mechanical Engineering, Automation and Control Systems 2018

Krasnyy, V.A.^1

Saint-Petersburg Mining University, 2, 21st Line V.O., St. Petersburg

199106, Russia^1

关键词: Friction properties;    Low friction coatings;    Machinery manufacturing;    Metal resistances;    Normal loads;    Sliding friction;    Tribological properties;    Working properties;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/560/1/012186/pdf
DOI  :  10.1088/1757-899X/560/1/012186

来源: IOP

【 摘 要 】

The use of nanomaterials in different branches of machinery manufacturing has been studied. Nanomaterials application for improving working properties of machine parts has been described. Fullerene S60 friction properties have been studied; the works of some authors on improving metal resistance with fullerene S60 coating have been analyzed. It has been determined that there is little information about fullerene tribological properties and they are mostly about fullerene S60 as a thin film and additive to lubricating materials in sliding friction with minor normal loads. The test results on fullerene S60 impact as low-friction coating and additive to lubricating oil for reducing steel and brass samples wear in fretting corrosion are given.