Tensile Properties and Impact Strength of RHDPE/BF Composites: The Effects of Chemical Treatment

1st International Conference on Mechanical Electronic and Biosystem Engineering

Ahmad Kamal, Aini Asifa^1 ; Noriman, N.Z.^1 ; Sam, S.T.^2 ; Al-Rashdi, Awad A.^3 ; Johari, I.^4 ; Razlan, Z.M.^5 ; Shahriman, A.B.^5 ; Zunaidi, I.^6 ; Khairunizam, Wan^5

Center of Excellence Geopolymer and Green Technology (CEGeoGTech), Faculty of Engineering Technology (FETech), Universiti Malaysia Perlis (UniMAP), UniCITI Alam Campus, Perlis

02100, Malaysia^1

School of Bioprocess Engineering, Universiti Malaysia Perlis, Kompleks Pengajian Jejawi 3, Perlis Arau

02600, Malaysia^2

Chemistry Department, Umm Al-Qura University, Al-qunfudah University College, Al-qunfudah Center for Scientific Research (QCSR), Saudi Arabia^3

School of Civil Engineering, Engineering Campus, Universiti Sains Malaysia, Penang, Malaysia^4

School of Mechatronic Engineering, Universiti Malaysia Perlis (UniMAP), Pauh Putra Campus, Perlis Arau

02600, Malaysia^5

Faculty of Technology, University of Sunderland, St Peter's Campus, SR6 0DD, Sunderland, United Kingdom^6

关键词: Chemical treatments;    High density polyethylene composites;    Impact property;    Injection molding process;    Mechanical analysis;    Mechanical measurements;    Natural fillers;    Twin screw extruders;   

Others  :  https://iopscience.iop.org/article/10.1088/1757-899X/557/1/012041/pdf
DOI  :  10.1088/1757-899X/557/1/012041

来源: IOP

【 摘 要 】

Recycled high-density polyethylene reinforced with bamboo filler were compounded with twin-screw extruder and injection molding process. The main objective of this study is to investigate the effect of different chemical treatment with different concentration for bamboo filler reinforced with recycled high-density polyethylene composites via injection molding. The fillers were reinforced with plastic for different concentration of sodium hydroxide and acetic acid at 2.5 %, 5.0 % and 7.5 %. Mechanical measurements will show the presence of different chemical treatment with different concentration insignificantly effect in the composites tensile properties and also impact properties. The result of the mechanical analysis carried out showed that the presence of natural filler in composites will improve the properties of the material.